Comparing Remanufactured Engines To Original Ones

By Timothy Burns

The process of doing a rebuilding of a product according to its original specifications by the combination of repaired, reused, or new parts is called as remanufacturing. The replacement of some parts or components which are already worn out and are subject to degradation is required. So remanufacturing is one form of product recovery, and so it is expected that the remanufactured product must be the same as a new product.

This process involves the restoration of a product into a like new shape by doing several industrial processes. The process start by disassembling the components and those that can are reusable are cleaned. Then after, these are being reassembled from old parts and are expected to look like the original product. The manufactured product ranges from compressors, air conditioning units, equipment and machines, robots, musical instruments, to remanufactured engines.

For the remanufacturing of engines, there are 4 main benefits of doing this. First is lower cost. Cost is one of the biggest factors that would greatly affect an engine remanufacturing. These type of engines may often cost 50 percent less as compared to a new Tier 4 engine. Maintenance for tier 4 engines can be costly as well.

Second is less downtime. When you decide on replacing an old engine, it may require significant engineering time and it may possibly provide rental equipment that is out of service for a few months. The processes of integrating and testing a new Tier 4 engine takes longer compared to remanufactured ones.

Third, increase in resale value. The serviceability and the availability are 2 main factors in the difficulty of selling the Tier 4 equipment. Some countries may have less regulations, and therefore, they might not have technologies that will support these products. And they might not have diesel fuel that has ultra low sulfur required for the effective operation of products.

Fourth is its sustainability. If you purchase an engine which is being remanufactured, it may be a good contribution for the reduction of waste impact out of landfills in the environment. If you utilize recycled parts or components, only eighty percent of energy is used compared to the new one. In conclusion remanufacturing products is much more better.

There are also some other forms of product recovery. These are the reuse, repair, refurbishing or reconditioning, recycling, and cannibalization. Literally, reuse means to use an item again after it is being used. Some advantages of reusing are saving energy and raw materials, reduce the disposal needs and costs, savings of costs for the businesses and consumers, and lastly, older items are more better when it comes to how it is handcrafted.

Repairing is the process of fixing mechanical, plumbing, or electrical devices. Scheduled maintenance is another term for it. It is a routine of actions that are performed to keep the device in a working order. It involves the combination of managerial, technical, supervision, and administrative actions.

Recycling is when waste materials undergo certain processes to convert it into some reusable objects. This would prevent waste and reduce the consumption of raw materials, energy, and air and water pollution. Cannibalization is the process of removing some parts from a similar device and transferring it to another device in order for it to function properly. Cannibalization is done when there no spare parts available.

About the Author:

If you are looking for information about remanufactured engines, pay a visit to our web pages online today. Additional details are available at http://www.motorworksengines.com now.